Transparent and moisture-proof PET film to prevent hydrone

 

Usage: OLED panel, solar thin-film batteries, electronic devices, pharmaceutical packaging, etc., to protect the seal to prevent moisture penetration.Protect to prevent moisture in the air to permeate.

 

Significance：Increase the lifetime of devices in humid environment by 1-5 times.

Principle：It was prepared with special separating molecular penetrating

layer on the surface of PET film.

Using：By film heat pressing machine,glue and seal them.Or by sealing machine for hot pressing film,hot melt film and seal them.

Specification：The width is 1.120m,  length is 200m/roll and light transmittance is above 80%. Material is special PET.

Film：The thickness is about 0.125mm. The width of edge banding is suggested to be bigger than 2mm.

Storage：Preserve for more than 10 years at room temperature 23 degree.Preserve for more than 5 years in ordinary environment (The adhesion power of gluing may decrease).Before using,electronic drying cabinet should be dry and keep for 48 hours.